Här
har jag provat nästa variant och det är att utnyttja 2 trådar av 40 wt. Rayon
Embroidery Thread som övertråd.
Tänk
er att man trär maskinen precis som när man använder en tvillingnål. Men här
har man bara en nål. Jag bytte nål och använde en som hade lite ”större öga”.
Resultatet
blev aningen tjockare och här får man brodera sakta för att det gäller att båda
trådarna löper parallellt hela tiden så resultatet blir jämt.
Here I have tried
another alternative and that is to use 2 strands of 40 wt. Rayon Embroidery
Thread as top thread.
Imagine that you
thread the machine just like when using a twin needle. But here you only use
one needle. I changed the needle and used one that had a little “larger
eye".
The result was
slightly thicker and here you have to embroider slowly in order for both
threads running in parallel all the time so the result is even.
Fortsättning följer ... To be continued ...
Design
facts and more:
Design
from Embroidery Collection #245
Decorative Edge Work - Husqvarna Viking

No comments:
Post a Comment